Distance Engine: This will refer to an external engine version where the Engine Type for the corresponding external engine is Distance Transit Time Engine. Mandatory. If a value is not selected, a default will usually be established based on the Country for the two shipping locations. If both addresses are in the same country, or the Distance Engine for Distance/Transit Time for both countries is the same, that distance engine will be the default. If a tariff has been defined for the Distance Transit Time Override and an override Distance Engine has been defined for the tariff, that Distance Engine will be used. Otherwise, the default will be Internal. Not editable in Update mode.
Division
Division: The division for the distance / transit time override. Mandatory. It can be modified by users that are not restricted to a specific division. It cannot be modified in Update mode.
Tariff Service
Tariff Number: Optional. When a value is specified, it must refer to a valid tariff and Service will also be required. Tariff Number and Service must refer to a valid tariff service combination. Tariff Number cannot be modified in Update mode.
Service: Optional. When a value is specified, it must refer to a valid master service and Tariff Number will also be required. Tariff Number and Service must refer to a valid tariff service combination. Service cannot be modified in Update mode.
Location 1
Location ID: The Location ID for the first of two shipping locations for the distance / transit time override. It is user-assigned, mandatory and cannot be modified in Update mode. The combination of Location ID and Location Type uniquely defines a shipping location.
Location Type: The Location Type for the first of two shipping locations for the distance / transit time override. There are four types of shipping location: Hub, Consignee, Load-At and Distribution Center. Location Type cannot be modified in Update mode.
Address 1
Address: The first of two addresses for the distance transit time override. Address is maintained using the Work with Address (Customer/Employee) page which can be accessed using the view details () icon. Address will default to the current address for Location 1. Address information on the Properties page is always presented in read-only format. Address in not editable in Update mode.
Location 2
Location ID: The Location ID for the second of two shipping locations for the distance / transit time override. It is user-assigned, mandatory and cannot be modified in Update mode. The combination of Location ID and Location Type uniquely defines a shipping location.
Location Type: The Location Type for the second of two shipping locations for the distance / transit time override. There are four types of shipping location: Hub, Consignee, Load-At and Distribution Center. Location Type cannot be modified in Update mode.
Address 2
Address: The second of two addresses for the distance transit time override. Address is maintained using the Work with Address (Employee) page which can be accessed using the view details () icon. Address will default to the current address for Location 2. Address information on the Properties page is always presented in read-only format. Address in not editable in Update mode.
Details
Note: This section is presented when the "Distinct Distances and Transit Times by Direction" in the global settings is False.
Distance: The distance between the two locations. Maintained in the data base in system Distance UOM and presented on the Properties page in user's Distance UOM. Editable in Update mode. A default value can be established by triggering the Retrieve operation which will invoke a request to access the distance and transit time from the applicable Distance Engine. Distance must be greater than zero (that is, at least .1 of a mile or kilometer). If Breakdown exists, distance will always be read-only and will contain the sum of the distances for the individual breakdown legs.
Transit Time: The transit time between the two locations. Maintained in hours and portions thereof. Editable in Update mode. A default value can be established by triggering the Retrieve operation which will invoke a request to access the distance and transit time from the applicable Distance Engine. . If Breakdown exists, transit time will always be read-only and will contain the sum of the transit times for the individual breakdown legs.
Location 1 to 2 Details and Location 2 to 1 Details
Note: The Location 1 to 2 Details and Location 2 to 1 Details sections are presented when the "Distinct Distances and Transit Times by Direction" in the global settings is True.
Overrides Active: When checked, this indicates that overrides are active between Location 1 and Location 2 (Location 1 to 2 Details section) or between Location 2 and Location 1 (Location 2 to 1 Details section). The Distance and Transit Time in the section will be editable only when this check box is enabled. At least one of the check boxes in these two sections must be selected.
Breakdown Exist: Specifies if breakdown exists between Location 1 and Location 2 (Location 1 to 2 Details section) or between Location 2 and Location 1 (Location 2 to 1 Details section).
Distance: Same as described in the Details section above.
Transit Time: Same as described in the Details section above.
Details tab
This tab displays the distance/transit time breakdown overrides in editable grids.
If bidirectional is enabled in Global Setting, then this tab displays two editable grids. The number of grids presented will depend on the ‘Override Active’ flag on each direction.
• If ‘Override Active’ is checked for the direction from Location 1 to Location 2, then breakdown grid for location 1 to 2 will be presented. All breakdown displayed or created in this grid will have Return direction equal to False.
• If ‘Override Active’ is checked for the direction from Location 2 to Location 1, then breakdown grid for location 2 to 1 will be presented. All breakdown displayed or created in this grid will have Return direction equal to True.
If both ‘Override Active’ are checked, then both grids will be presented.
If bidirectional is disabled in Global Setting or navigated from pages with predetermined direction, for example, Distance/Transit Times for Load from Load Processing, then only one editable grid will be presented for the given from/to locations. All breakdown displayed or created in this grid will have Forward direction (i.e. from Location 1 to Location 2).
Breakdowns
Location 1 to 2 Details and Location 2 to 1 Details
Note: The Location 2 to 1 Details section is presented when the "Distinct Distances and Transit Times by Direction" in the global settings is True.
Country: Specifies the name of the country. Allows you to select the country.
State/Province: Specifies the name of the state or province. This value is allowed only if the country is Canada, USA or Mexico.
Distance: The distance between the two locations. Maintained in the data base in system Distance UOM and presented on the Properties page in user's Distance UOM. Editable in Update mode. A default value can be established by triggering the Retrieve operation which will invoke a request to access the distance and transit time from the applicable Distance Engine. Distance must be greater than zero (that is, at least .1 of a mile or kilometer).
Transit Time: The transit time between the two locations. Maintained in hours and portions thereof. Editable in Update mode. A default value can be established by triggering the Retrieve operation which will invoke a request to access the distance and transit time from the applicable Distance Engine.
) icon. Address will default to the current address for Location 1. Address information on the Properties page is always presented in read-only format. Address in not editable in Update mode.